Collections

Colour

Additional EN Norm Test	

Certification

Certification PPE

Closure

Coating type

Cut protection level

Environment of use

Fitting Shoes

Flame resistant collection

Function

Hi-vis co-certification

Hi-vis classification

Hood

Lining

Material

Sustainability Label

Nail Penetration

Outsole Material

Palm material 

Safety Rating

Shoe Collection

Shoe Type

Toe Cap

Type of garment

Type of jacket

Type of work

Upper Material

Gender

Laundry

Size

Automatskapas utefter position 13+ i ett artikelnummer

Recommended Usage

NEW!

NEW COLOUR!

Comfortable, flexible and durable 4-way stretch. Good washing abilities. The fibre is partially bio-based, which contributes to reducing the climate footprint

Light fabric with a good stretch function for comfort in warm climates.

Lighter quality with stretch that protects against dirt and splash while retaining the mobility of the garment. Suitable for industry and service. Keeps color and shape.

CORDURA® COOLMAX® 4-way stretch, durable with good stretch function. CORDURA® on the face for extreme durability and COOLMAX® inside to keep you dry and cool. Dries quickly. 

Extremely durable Denim fabric with stretch. The mix of CORDURA® and cotton provides high abrasion resistance and the stretch provides great comfort.

Built for pace and visibility. The main fabric is a comfortable, flexible and durable 4-way stretch that delivers all-day comfort, while ventilating mesh panels at the knees and yoke help you keep the right temperature when work ramps up. 
The ToolRig™ rail runs 360° around the waist, letting you move pockets and accessories freely. ToolRig™ tool pockets and a hammer holder bracket are included, and they are detachable, which is ideal when switching tasks. For heavier rigs, the trousers feature loops for ToolRig™ braces/harness for better ergonomics and load management. 
Knee work stays comfortable and secure with kneepad pockets in reinforced CORDURA® stretch. Storage is generous with extra-wide tool pockets, CORDURA® reinforcements where wear is highest and a raised back waist that keeps you covered in motion. Segmented reflective tape makes sure you are seen when it matters most.
<ul>
<li>Comfortable, flexible and durable 4-way stretch</li>
<li>Ventilating mesh panels at knees and yoke</li>
<li>ToolRig™ rail 360° around the waist – move pockets and accessories freely</li>
<li>ToolRig™ tool pockets and hammer holder bracket included</li>
<li>Loops for ToolRig™ braces/harness for better ergonomics and load management</li>
<li>Kneepad pockets in reinforced CORDURA® stretch</li>
<li>Raised back waist</li>
<li>CORDURA®-reinforced tool pockets</li>
<li>Segmented reflective tape</li>
</ul>

ToolRig™ Hi-Vis Trousers 4-Way Stretch

Built for indoor environments and mobile work. The main fabric is a light 2-way stretch that breathes and stays comfortable as temperatures rise, while 4-way stretch panels at seat, knees and crotch follow every move without holding you back. 
The ToolRig™ rail runs 360° around the waist, letting you move pockets and accessories freely. This service trouser is delivered without tool pockets, so add ToolRig™ tool pockets and ToolRig™ Sliders if you want to build your own rig. 
Details are tuned for workflow, including a pen and knife pocket designed for both right- and left-handed users, and a leg pocket with internal mesh phone pocket that keeps the mobile secure and easy to reach. Pre-shaped knees for increased mobility and comfort during kneeling work.
<ul>
<li>Light 2-way stretch for comfort in warm environments</li>
<li>4-way stretch panels at seat, knees and crotch for extra mobility</li>
<li>ToolRig™ rail 360° around the waist – move pockets and accessories freely</li>
<li>Add ToolRig™ tool pockets if needed</li>
<li>Pen and knife pocket for right- and left-handed users</li>
<li>Leg pocket with internal mesh phone pocket</li>
<li>Pre-shaped knees for increased mobility and comfort</li>
</ul>

ToolRig™ Service Trousers Stretch

Comfortable and light craftsmen’s trousers in 2-way stretch with 4-way stretch panels where you need maximum freedom to move.
The ToolRig™ rail runs 360° around the waist, letting you move pockets and accessories freely. This model is supplied without pockets, so add ToolRig™ tool pockets and ToolRig™ Sliders if you want to build your own rig.
For knee work you have kneepad pockets in reinforced CORDURA® stretch that deliver both protection and flexibility. Pre-shaped knees for increased mobility and comfort during kneeling work, and reflective details on the legs help you stay seen when the light drops.
<ul>
<li>2-way stretch combined with 4-way stretch panels</li>
<li>ToolRig™ rail 360° around the waist – move pockets and accessories freely</li>
<li>Add ToolRig™ tool pockets and ToolRig™ Sliders as needed</li>
<li>Loops for ToolRig™ braces/harness for better ergonomics and load management</li>
<li>Kneepad pockets in reinforced CORDURA® stretch</li>
<li>Pre-shaped knees for increased mobility and comfort during kneeling work</li>
<li>Black reflective details on the back of the legs</li>
</ul>

ToolRig™ Craftsman Trousers Stretch

For those who want durability, freedom to move and a smart system approach. The main fabric in CORDURA® 4-way stretch follows every step, while COOLMAX® on the inside wicks moisture to keep you dry and comfortably cool when the pace picks up. Zip ventilation along the outside of the legs fine-tunes the climate further. 
The ToolRig™ rail runs 360° around the waist, letting you move pockets and accessories freely. Tool pockets and a hammer holder bracket are included, and when the load increases you simply connect ToolRig™ braces or harness via dedicated loops. Pre-shaped knees for increased mobility and comfort during kneeling work, and a raised back waist keep comfort high throughout the day. 
Kneepad pockets in CORDURA® Stretch Dobby handle daily wear without sacrificing flexibility. Discrete black reflective details at the back increase visibility, and details such as a reinforced ruler pocket, extra pocket and pen pocket show what premium means in practice.
<ul>
<li>CORDURA® 4-way stretch main fabric for durability and mobility</li>
<li>COOLMAX® on the inside for moisture transport and quick drying</li>
<li>ToolRig™ rail 360° around the waist</li>
<li>Tool pockets and hammer holder bracket included</li>
<li>Loops for ToolRig™ braces/harness for better ergonomics and load management</li>
<li>Kneepad pockets in CORDURA® Stretch Dobby</li>
<li>CORDURA®-reinforced tool pockets</li>
<li>Zip ventilation along the outside of the legs</li>
<li>Pre-shaped knees for increased mobility and comfort during kneeling work and raised back waist</li>
<li>Black reflective details on the back of the legs</li>
</ul>

ToolRig™ STRIKER Craftsman Trousers 4-Way Stretch

Built to take the job and move with you. Durable CORDURA® denim meets smart stretch panels at the crotch and calves for optimal freedom of movement. Top-loaded kneepad pockets in CORDURA® stretch let you work comfortably on your knees without losing flexibility. Pockets are CORDURA®-reinforced to withstand everyday wear. 
The ToolRig™ rail runs 360° around the waist, letting you move pockets and accessories freely. ToolRig™ tool pockets and a hammer holder bracket are included, and for heavier setups you can connect a ToolRig™ harness or braces in the dedicated loops.
<ul>
<li>Durable CORDURA® denim with stretch</li>
<li>ToolRig™ rail 360° around the waist – move pockets and accessories freely</li>
<li>ToolRig™ tool pockets and hammer holder bracket included</li>
<li>Loops for ToolRig™ braces/harness for better ergonomics and load management</li>
<li>Stretch panels at crotch and calves for maximum mobility</li>
<li>Top-loaded kneepad pockets in CORDURA® stretch for comfort during knee work</li>
<li>CORDURA®-reinforced pockets for extra durability</li>
</ul>

This strap is designed for the Blåkläder ToolRig™ system and lets you position a standard hammer holder exactly where you want it. Attach the holder, clip it onto the rail – done. The hook-and-loop fastening makes mounting quick, simple and flexible, with no belt needed.

ToolRig™ Hammer Holder Strap

Your stable base when the load gets heavy. This tool belt uses the same ToolRig™ rail as our work trousers, so you can move pockets and accessories to where they work best. The padded waist reduces pressure, the quick-release buckle makes on/off easy and the adjustable length gives a precise fit even over outerwear. For maximum ergonomics, pair with the ToolRig™ Harness (2521) or ToolRig™ Braces (2522).

ToolRig™ Tool Belt

Pairs with the ToolRig™ Tool Belt to distribute weight comfortably across the shoulders. Padded shoulders add comfort when the tool load grows. Lockable hooks connect securely to both the ToolRig™ tool belt and ToolRig™ trousers. Adjust the length and attach your tools to the shoulder straps – stable, ergonomic and ready for long shifts.

ToolRig™ Harness

Clip on to ToolRig™ trousers or the ToolRig™ Tool Belt to ease the load when gear gets heavy while keeping trousers in place. Wide, strong straps distribute weight evenly and the lockable metal hooks fasten securely to both belt and trousers. 
Lightly padded shoulders add comfort and length adjusts in seconds. A smart solution when you want relief without going all the way to a harness.

ToolRig™ Braces

Developed with the carpenter in mind, yet just as useful for any trade that wants order and overview. It attaches easily via the Blåkläder ToolRig™ system and works just as well on trousers as on accessories, making it simple to adapt your carry during the day. 
The construction is robust and shape-stable so openings stay open and accessible. 
Dedicated compartments for a ruler and speed square. Then four inner compartments and three outer, slightly lower ones to keep tools and small parts in place. External straps let you attach additional accessories.

ToolRig™ Carpenter Pouch

Developed with the electrician in mind, yet just as useful for any trade that wants order and overview. It attaches easily via the Blåkläder ToolRig™ system and works just as well on trousers as on accessories, making it simple to adapt your carry during the day. 
The build is robust and shape-stable, keeping openings open for clear visibility and fast access. 
Inside are six slim compartments to hold screwdrivers securely and within easy reach. Further out are three lower compartments that support quick access to pliers and similar tools. External straps let you attach additional accessories.

ToolRig™ Electrician Pouch

A materials pouch when you need lots of space and clear overview. It attaches easily via the Blåkläder ToolRig™ system and works just as well on trousers as on accessories, making it simple to adapt your carry during the day. 
The construction is robust and shape-stable so openings stay open and accessible. 
Two compartments make sorting simple: an inner one to keep heavier material stable and an outer one for quick access. Fill it with screws, plugs, nails or similar and you’ve got a roomy, practical solution that helps you work efficiently. Straps on the outside make it easy to attach extra accessories.

ToolRig™ Nail & Screw Pouch

A large materials pouch for extra capacity and quick overview. It attaches easily via the Blåkläder ToolRig™ system and works just as well on trousers as on accessories, making it simple to adapt your carry during the day. 
The construction is robust and shape-stable so openings stay open and accessible. 
This model has one large main compartment plus an inner sleeve for a speed square or similar. Load it with screws, plugs, nails or other materials and you have a roomy, efficient solution. Straps on the outside let you attach extra accessories.

A large materials pouch when you need extra capacity and easy overview. It attaches easily via the Blåkläder ToolRig™ system and works just as well on trousers as on accessories, making it simple to adapt your carry during the day. 
The construction is robust and shape-stable so openings stay open and accessible. 
Two generous side-by-side compartments keep contents separated and sorted. Whether you load screws, plugs, nails or similar, you get a spacious, practical pocket for efficient working. Straps outside for attaching extra accessories, plus an internal compartment for a speed square.

A robust, adjustable hammer holder that makes work smoother. It connects quickly via the Blåkläder ToolRig™ system and gives you a stable, easy-to-reach place for your hammer. The loop size adjusts so you can balance retention and quick access. 
The holder pivots 45° in either direction, making insertion and draw easier and keeping it comfortable for both right- and left-handed users. The 10 cm loop holds the hammer securely even in motion, without swing. At the smallest loop setting it also works a treat for stowing a try square.