Colour

Certification

Collections

Function

Lining

Material

Sustainability Label

Type of garment

Gender

Laundry

Size

Automatskapas utefter position 13+ i ett artikelnummer

NEW!

Cordura fabric. Extreme durability with high abrasion resistance.

This strap is designed for the Blåkläder ToolRig™ system and lets you position a standard hammer holder exactly where you want it. Attach the holder, clip it onto the rail – done. The hook-and-loop fastening makes mounting quick, simple and flexible, with no belt needed.

ToolRig™ Hammer Holder Strap

Slim and nimble yet roomy enough for today’s essential tools and consumables. It attaches easily via the Blåkläder ToolRig™ system and works just as well on trousers as on accessories, making it simple to adapt your carry during the day. 
Inside you’ll find a larger zipped main compartment, then an open compartment for materials such as screws, plugs or nails. The three outer compartments organise screwdrivers and small tools for instant access. External straps make it easy to attach a knife and extra accessories.
Supplied with ToolRig™ slider + lockable slider.

ToolRig™ Tool Pocket

Slim and nimble yet roomy enough for today’s essential tools and consumables. It attaches easily via the Blåkläder ToolRig™ system and works just as well on trousers as on accessories, making it simple to adapt your carry during the day. 
The pocket features an inner, larger main compartment and a slightly smaller outer compartment – both with zips. 
Supplied with ToolRig™ slider + lockable slider.

ToolRig™ Nail & Screw Pocket

Your stable base when the load gets heavy. This tool belt uses the same ToolRig™ rail as our work trousers, so you can move pockets and accessories to where they work best. The padded waist reduces pressure, the quick-release buckle makes on/off easy and the adjustable length gives a precise fit even over outerwear. For maximum ergonomics, pair with the ToolRig™ Harness (2521) or ToolRig™ Braces (2522).

ToolRig™ Tool Belt

Pairs with the ToolRig™ Tool Belt to distribute weight comfortably across the shoulders. Padded shoulders add comfort when the tool load grows. Lockable hooks connect securely to both the ToolRig™ tool belt and ToolRig™ trousers. Adjust the length and attach your tools to the shoulder straps – stable, ergonomic and ready for long shifts.

ToolRig™ Harness

Clip on to ToolRig™ trousers or the ToolRig™ Tool Belt to ease the load when gear gets heavy while keeping trousers in place. Wide, strong straps distribute weight evenly and the lockable metal hooks fasten securely to both belt and trousers. 
Lightly padded shoulders add comfort and length adjusts in seconds. A smart solution when you want relief without going all the way to a harness.

ToolRig™ Braces

A tough tool bag that keeps your gear organised. Carry by the handle or on the shoulder. The open, stable construction gives instant overview and fast access to everything you need. 
Whatever you bring, there are strategically placed compartments and straps for it. On both sides you’ll find Blåkläder ToolRig™ panels with four ToolRig™ mounts per side, so you can click on the tool pockets that fit the task and bring your entire rig with you. 
The construction is stable and sturdy – built to stand up, stand steady and stand the test of time.

ToolRig™ Tool Bag

Developed with the electrician in mind, yet just as useful for any trade that wants order and overview. It attaches easily via the Blåkläder ToolRig™ system and works just as well on trousers as on accessories, making it simple to adapt your carry during the day. 
The build is robust and shape-stable, keeping openings open for clear visibility and fast access. 
Inside are six slim compartments to hold screwdrivers securely and within easy reach. Further out are three lower compartments that support quick access to pliers and similar tools. External straps let you attach additional accessories.

ToolRig™ Electrician Pouch

A materials pouch when you need lots of space and clear overview. It attaches easily via the Blåkläder ToolRig™ system and works just as well on trousers as on accessories, making it simple to adapt your carry during the day. 
The construction is robust and shape-stable so openings stay open and accessible. 
Two compartments make sorting simple: an inner one to keep heavier material stable and an outer one for quick access. Fill it with screws, plugs, nails or similar and you’ve got a roomy, practical solution that helps you work efficiently. Straps on the outside make it easy to attach extra accessories.

ToolRig™ Nail & Screw Pouch

A large materials pouch when you need extra capacity and easy overview. It attaches easily via the Blåkläder ToolRig™ system and works just as well on trousers as on accessories, making it simple to adapt your carry during the day. 
The construction is robust and shape-stable so openings stay open and accessible. 
Two generous side-by-side compartments keep contents separated and sorted. Whether you load screws, plugs, nails or similar, you get a spacious, practical pocket for efficient working. Straps outside for attaching extra accessories, plus an internal compartment for a speed square.

A robust, adjustable hammer holder that makes work smoother. It connects quickly via the Blåkläder ToolRig™ system and gives you a stable, easy-to-reach place for your hammer. The loop size adjusts so you can balance retention and quick access. 
The holder pivots 45° in either direction, making insertion and draw easier and keeping it comfortable for both right- and left-handed users. The 10 cm loop holds the hammer securely even in motion, without swing. At the smallest loop setting it also works a treat for stowing a try square.

ToolRig™ Hammer Holder

Give your favourite pockets a second life – and a place on the rail. This is the same buckle used on Blåkläder ToolRig™ accessories such as tool pockets and hammer holders. Fit it to existing tools or accessories to make them compatible with the ToolRig™ rail on our trousers. 
Ideal for upgrading or replacing a buckle that has given up after hard use. For a complete set-up, combine with a Slider (art. 2535 or 2536). Screws for installation are included.

ToolRig™ Buckle

Make your kit as mobile as you are. This slider with holder mounts to the ToolRig™ rail that runs 360° around the waist on our trousers and tool belts. Move pockets and accessories to where the job demands, front, side or back – in seconds. 
Perfect for switching tasks without taking your gear off. Sold as a 2-pack and also available in a lockable version (art. 2536) if you want to fix the pocket’s position.

ToolRig™ Slider 2-Pack

This slider with holder mounts to the ToolRig™ rail that runs 360° around the waist on our trousers and tool belts. Shift pockets and accessories to the front, side or back in seconds, ideal when you move between tasks without removing your rig. 
This lockable model lets you fix the pocket’s position. Works perfectly alongside the non-lockable model (art. 2535).

Tool Belts & Accessories

ToolRig™ Hammer Holder Strap

ToolRig™ Tool Pocket

ToolRig™ Nail & Screw Pocket

ToolRig™ Tool Belt

ToolRig™ Harness

ToolRig™ Braces

ToolRig™ Tool Bag

ToolRig™ Electrician Pouch

ToolRig™ Nail & Screw Pouch

ToolRig™ Nail & Screw Pouch

ToolRig™ Hammer Holder

ToolRig™ Buckle

ToolRig™ Slider 2-Pack

ToolRig™ Slider Lockable