Colour

Additional EN Norm Test	

Certification

Certification PPE

Closure

Coating type

Collections

Cut protection level

Environment of use

Fitting Shoes

Function

High vis co-certification

High vis classification

Hood

Lining

Material

Nail Penetration

Outsole Material

Palm material 

Safety Rating

Shoe Collection

Shoe Type

Toe Cap

Type of garment

Type of jacket

Type of work

Upper Material

Gender

Laundry

Size

Automatskapas utefter position 13+ i ett artikelnummer

Recommended Usage

NEW!

Flame retardant fabric. High proportion of cotton provides clothes that are comfortable to wear. Certified  EN 1149-3, EN 61482-1-2, EN IEC 61482-1-1, EN ISO 11612. 

Flame retardant fabric, heavy but still flexible fabric for hard environments. Certified for welding class 2. The fabric is certified EN 1149-3, EN IEC 61482-1-1, EN 61482-1-2, EN ISO 11611, EN ISO 11612. 

Welding gloves made of grain goat leather with seams stitched with aramid thread, which withstands high temperatures. The extra long cuff keeps welding spatter and sparks off the arms. Tight fit for increased dexterity.

Welding gloves

Elasticised welding hat, available in four sizes. The hat protects against dirt and can readily be worn under a welding helmet. Also excellent corporate profiling potential. 
Certified to EN ISO 14116, EN 1149-5.

Welding cap

A welding boot made of durable leather, with an outsole in nitrile rubber that can withstand temperatures up to 300°C. A foil heat shield is built into the sole construction. The toe cap is made of composite, and the penetration protection plate of a textile material. 
The Freelock solution makes it nice and easy to put the boots on and take them off, and it’s covered and protected by a leather-clad tongue that fastens with Velcro. 
The insole, anatomically designed for optimum comfort, is made of a soft PU material and has a textile upper with good moisture absorption. Women´s last in UK sizes 2-6.

ELITE Safety Boot Welding S3

Welding jacket with reflective details for increased visibility. Comfortable fit with pre-bent elbows and adjustable sleeve ends with velcro. 
Certified according to EN 1149-5, EN ISO 11611, EN ISO 11612, IEC 61482-2.

Welding Jacket

Durable apron that works perfectly when welding or grinding, with special reinforcing fabric that repels molten metal. Protects against iron, zinc and aluminium and is industrially washable. 
Certified according to EN ISO 11611, EN ISO 11612.

Welding apron

Bib overalls suitable for welding and similar jobs. The trousers can be adjusted at the waist with buttons and have a chest pocket, external knee pad pockets, left leg pocket, right folding rule pocket, and reflective details on the back, lower leg and rear belt loop. Tested for industrial laundry.
Certified to EN 1149-5, EN ISO 11612, EN ISO 11611, IEC 61482-2, EN 14404.

Welding Bib trousers

Welding trouser with reflective details for increased visibility. The trouser features smart pocket solutions such as side pockets, ruler pocket and inner knee pad pockets. 
Certified according to EN 14404, EN 1149-5, EN ISO 11611, EN ISO 11612, IEC 61482-2.

Welding Trousers

A highly durable shoe for hot and tough working conditions. It features a leather upper, composite toe cap, and soft nail penetration protection according to PL standard. 
The Freelock system, which allows for easy entry and exit, is covered and protected by a leather tongue that closes with Velcro. 
The nitrile rubber outsole is resistant to temperatures up to 300°C, and a heat-protective foil is incorporated into the sole construction. 
The insole, anatomically designed for comfort, is made from a soft PU material and has a textile upper for excellent moisture absorption. Women´s last in UK sizes 2-6.

ELITE Safety Shoe Welding S3L

Perfect gloves when performing really heavy work in hot environments. Made of split leather with a thin cotton fleece lining to provide insulation against heat. 
Seams stitched with aramid thread for extra resistance to high temperatures. The extra long cuff keeps welding spatter and sparks off the arms.

Heat protection gloves

A boot made especially for work with asphalt. It´s made of strong, durable leather with a smooth outsole made of nitrile rubber that can manage temperatures up to 300°C. Inside the sole, there is a heat-protective foil, and the nail penetration is made of soft textile. 
The insole, with anatomical support, is made of a smooth PU material covered with a textile surface with good moisture absorption. 
The Freelock function, covered with a leather tongue, fastened by two velcro straps, makes it easy to jump in and out of the shoes. Women’s last in sizes 35-39.

Showing results for: "welding"