FREELOCK GUIDE
u003ch2u003eu003cstrongu003eREPAIRu003c/strongu003eu003cstrongu003eING FREELOCKu003c/strongu003eu003c/h2u003ernu003cstrongu003eTo give your safety shoes from Blåkläder even longer life, you can repair the lacing and locking system Freelock yourself. And this is how you do it.u003c/strongu003ernrnFor even more information and visual instructions, see the video below.rnrnu003cstrongu003e1)u003c/strongu003e Connect the wire.rnrnu003cstrongu003e2)u003c/strongu003e Cut the wire 10-12cm from the base.rnrnu003cstrongu003e3)u003c/strongu003e The dial-set consists of dial, reel, and cover.rnrnu003cstrongu003e4)u003c/strongu003e You now have two options for how to insert the thread into the dial:u003cstrongu003ern4a.u003c/strongu003e In the tongue position, penetrate the wire directly through the dial.rnrnu003cstrongu003eOr:rn4b.u003c/strongu003e In the eyestay position, cross the wire first and penetrate through to the dial.rnrnu003cstrongu003e5)u003c/strongu003e Penetrate the wire through the holes, following numbers and arrow directions written on the reel.rnrnu003cstrongu003ernrnu003c/strongu003e
u003cstrongu003e6)u003c/strongu003e Put/push the wire to the end at position 3.rnrnu003cstrongu003e7)u003c/strongu003e Pull the wire no. 2 and no. 3 step by step to make the loop.rnrnu003cstrongu003e8)u003c/strongu003e Place the reel in the dial: CAUTION – THE WIRE SHOULD NOT BE TANGLEDrnrnu003cstrongu003e9)u003c/strongu003e Position the cover above the dial. Assemble one side first and the other firmly.rnrnu003cstrongu003e10)u003c/strongu003e When assembling the cover, make sure the TOP sign is positioned upward and the direction is right.rnrnu003cstrongu003e11)u003c/strongu003e First, push the dial into two holes behind obliquely.rnrnu003cstrongu003e12)u003c/strongu003e Press the dial down firmly to the base part – MAKE SURE YOU HEAR A u0022CLICKu0022 SOUND. Turn the dial clockwise to tighten the wire and push the dial upward to release the wire.rnrn